 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN8202 VEC2803 VEC2803 Features * * MOSFET : P-Channel Silicon MOSFET SBD : Schottky Barrier Diode General-Purpose Switching Device Applications DC/DC converter. Composite type with a P-Channel Sillicon MOSFET and a Schottky Barrier Diode contained in one package facilitating high-density mounting. [MOSFET] * Low ON-resistance. * 4V drive. [SBD] * Short reverse recovery time. * Low forward voltage. Specifications Absolute Maximum Ratings at Ta=25C Parameter [MOSFET] Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature [SBD] Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle 30 35 1 5 --55 to +125 --55 to +125 V V A A C C VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm) 1unit --30 20 --3 --12 0.9 150 --55 to +125 V V A A W C C Symbol Conditions Ratings Unit Marking : BN Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 12505PE TS IM TB-00001017 No.8202-1/6 VEC2803 Electrical Characteristics at Ta=25C Parameter [MOSFET] Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage [SBD] Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time VR VF 1 VF 2 IR C trr IR=0.5mA IF=0.5A IF=1A VR=15V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. 30 0.35 0.4 27 10 0.39 0.45 360 V V V A pF ns V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd VSD ID=--1mA, VGS=0 VDS=--30V, VGS=0 VGS=16V, VDS=0 VDS=--10V, ID=-1mA VDS=--10V, ID=-1.5A ID=--1.5A, VGS=-10V ID=--0.7A, VGS=-4V VDS=--10V, f=1MHz VDS=--10V, f=1MHz VDS=--10V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=--10V, VGS=-10V, ID=--3A VDS=--10V, VGS=-10V, ID=--3A VDS=--10V, VGS=-10V, ID=--3A IS=--3A, VGS=0 --1.0 2.0 3.4 65 117 510 115 78 11 17 53 35 11 2.4 1.7 --0.87 --1.2 86 168 --30 --1 10 --2.4 V A A V S m m pF pF pF ns ns ns ns nC nC nC V Symbol Conditions Ratings min typ max Unit Package Dimensions unit : mm 2241 Electrical Connection 8 7 6 5 0.3 8 7 65 0.15 1 : Anode 2 : No Contact 3 : Source 4 : Gate 5 : Drain 6 : Drain 7 : Cathode 8 : Cathode Top view 2.8 2.3 0.25 0.25 1 2 2.9 3 0.65 4 1 2 3 4 0.75 0.07 1 : Anode 2 : No Contact 3 : Source 4 : Gate 5 : Drain 6 : Drain 7 : Cathode 8 : Cathode SANYO : VEC8 No.8202-2/6 VEC2803 Switching Time Test Circuit [MOSFET] VIN 0V --10V VIN ID= --1.5A RL=10 50 10s --5V 100 10 trr Test Circuit [SBD] VDD= --15V Duty10% 100mA D PW=10s D.C.1% VOUT G 100mA trr VEC2803 P.G 50 S --4.0 ID -- VDS V --5. 0 [MOSFET] --5 ID -- VGS VDS= --10V [MOSFET] --4 . --3.5 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 --0.1 0V Drain Current, ID -- A --6. 0 V --4 Drain Current, ID -- A --10 --8.0V V --3 VGS= --2.5V --2 --1 Ta= 75 C 0 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 220 Drain-to-Source Voltage, VDS -- V IT07767 [MOSFET] RDS(on) -- VGS Ta=25C 220 Gate-to-Source Voltage, VGS -- V IT07768 [MOSFET] RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- m 200 180 160 Static Drain-to-Source On-State Resistance, RDS(on) -- m 200 180 160 140 120 100 80 60 40 20 --75 --50 --25 0 25 50 75 100 125 150 175 ID= --1.5A 140 --0.7A 120 100 80 60 40 0 --2 --4 --6 --8 --10 --12 IT07769 G A, V 0.7 = -ID --4V S= , VG 1.5A I D= -- --10 S= V Gate-to-Source Voltage, VGS -- V Ambient Temperature, Ta -- C 25 C --25 IT09169 C No.8202-3/6 10mA VEC2803 10 yfs -- ID [MOSFET] VDS= --10V --10 7 5 3 2 IF -- VSD VGS=0 [MOSFET] Forward Transfer Admittance, yfs -- S 7 5 Forward Current, IF -- A 3 2 Ta= 25 75 C C 1.0 --0.1 7 5 3 2 7 5 3 --0.1 2 3 5 7 --1.0 2 3 5 7 --0.01 7 5 3 2 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.1 --0.001 --0.3 Drain Current, ID -- A 2 100 IT07771 SW Time -- ID td(off) tf [MOSFET] 1000 7 5 Ciss, Coss, Crss -- VDS [MOSFET] f=1MHz Ciss Diode Forward Voltage, VSD -- V Ta= 75 C 25 C --25 C C --25 --1.0 7 5 3 2 IT07772 VDD= --15V VGS= --10V Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 7 5 3 2 3 2 td(on) 10 7 5 3 2 1.0 --0.1 tr 100 7 5 3 2 Coss Crss 2 3 5 7 --1.0 2 3 5 7 0 --5 --10 --15 --20 --25 --30 Drain Current, ID -- A --10 --9 IT07773 VGS -- Qg [MOSFET] 3 2 --10 7 5 Drain-to-Source Voltage, VDS -- V IT07774 [MOSFET] ASO IDP= --12A ID= --3A <10s 1m s Gate-to-Source Voltage, VGS -- V VDS= --10V ID= --3A Drain Current, ID -- A --8 --7 --6 --5 --4 --3 --2 --1 0 0 2 4 6 8 10 12 14 IT07775 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 10 DC 10 m 0m s op s er ati on Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 5 7 --0.1 23 5 7 --1.0 23 5 7 --10 23 5 --0.01 --0.01 2 3 Total Gate Charge, Qg -- nC 1.0 Drain-to-Source Voltage, VDS -- V IT09170 PD -- Ta M ou nt [MOSFET] Allowable Power Dissipation, PD -- W 0.9 0.8 ed on ac er 0.6 am ic bo ar d (9 0.4 00 m m2 ! 0. 8m 0.2 m )1 un it 160 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- C IT09171 No.8202-4/6 VEC2803 10 7 5 3 2 IF -- VF [SBD] 3 2 10000 7 5 3 2 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0 IR -- VR C Ta=125 100C 75C [SBD] C Ta =-25 C 5C 0.01 7 5 3 2 0 0.001 0.1 0.2 0.3 0.4 0.5 IT07944 12 25 0.1 7 5 3 2 0 C 75 1.0 7 5 3 2 Reverse Current, IR -- A Forward Current, IF -- A C 50 C 50C 25C 10 --25C 10 20 30 40 IT07945 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W 0.6 PF(AV) -- IO (1) Reverse Voltage, VR -- V 140 [SBD] (2) (4) (3) Tc -- IO 0.5 Case Temperature, Tc -- C (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 120 [SBD] (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 100 0.4 0.3 Rectangular wave 360 80 60 0.2 40 Sine wave 0.1 180 0 0 0.2 0.4 0.6 0.8 360 1.0 (1) (2) (4) (3) 20 0 1.2 IT08214 0 0.2 0.4 0.6 0.8 1.0 1.2 IT08216 Average Forward Current, IO -- A 3 2 C -- VR Average Forward Current, IO -- A [SBD] f=1MHz Interterminal Capacitance, C -- pF 100 7 5 3 2 10 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Reverse Voltage, VR -- V 5 7 100 IT07948 No.8202-5/6 VEC2803 Note on usage : Since the VEC2803 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2005. Specifications and information herein are subject to change without notice. PS No.8202-6/6 |
Price & Availability of VEC2803
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |